Author Topic: New Brakes and Rotors on TV  (Read 653 times)

0 Members and 1 Guest are viewing this topic.

Offline Lone Lock

  • Right At Home
  • *
  • Posts: 2493
    • View Profile
  • State: PA/USA
  • TV: 2008 Dodge Ram 1500 Quad Cab
  • POP: 2006 Skyline Nomad TT
  • TNT: EZ Up 10x10
New Brakes and Rotors on TV
« on: March 01, 2017, 08:23:48 AM »
It is about time to replace my front brakes on my 2007 Toyota Tundra Crew Max Pickup.  I tow a TT that is 5,000#'s.  I want to make sure I get good brakes and have been reading a little bit about them but there is a lot of information and opinions out there. 

1) what type of brake pad do I want?  I read that high friction pads stop well but are noisy.  What is a high friction pad?  I usually hear of Organic, Metallic, or Semi-Metallic brake pads.

2) What type of Rotor do I want.  Slotted, OEM, drilled holes?  I understand that rotors with slots or holes dissipate the heat better and the pads grab on the multiple edges for increased stopping power when you initially apply the brakes.

3)  If I change the rotors and pads to aggressively stop up front, must I change the back to a similar setup at the same time or can I do those in a few months? 
Matt O

Offline acenorm

  • Going in the Woods
  • *
  • Posts: 422
    • Norm Ehrke
    • View Profile
  • State: NJ/USA
  • TV: 2013 GMC Yukon XL
  • POP: 2014 Jayco X23F
Re: New Brakes and Rotors on TV
« Reply #1 on: March 01, 2017, 09:52:30 AM »
Rock Auto has a 4 wheel kit by Power Stop that I got for my 2013 Yukon XL a couple years ago, it is under their heavy duty banner and it comes with cross drilled rotors and severe duty pads. Haven't had a problem with them and no noise. Price wasn't bad either. They do have front or back available, but I did all the way around at the same time. Also, the drilled rotors dissipate heat and less likely to warp.
This is what I looked up for your truck.
https://www.rockauto.com/en/catalog/toyota,2007,tundra,4.7l+v8,1438250,brake+&+wheel+hub,rotor+&+brake+pad+kit,13824

Best Regards,
Norm
My 2 cents, but probably worth one.

Offline Lone Lock

  • Right At Home
  • *
  • Posts: 2493
    • View Profile
  • State: PA/USA
  • TV: 2008 Dodge Ram 1500 Quad Cab
  • POP: 2006 Skyline Nomad TT
  • TNT: EZ Up 10x10
Re: New Brakes and Rotors on TV
« Reply #2 on: March 01, 2017, 11:56:36 AM »
$400 for all 4 wheels or $200 front or rear....that's doable. 

I want to research the pads to see if there is multiple options or variations that Toyota used on my year.  Honestly I am a little concerned with getting parts online and when they come they are the wrong ones due to options the manufacturer had. 

I got brakes for my Dodge 1500 and I answered all of the questions pep boys asked me in the store and when I got home they were wrong.  I was pissed because this wasn't the first time this particular Pep Boys has screwed me with wrong parts.  Lets just say I am happy that an Advanced Auto Parts opened up nearby.....But I don't think the stores carry the heavy duty brakes that I want for towing, slotted or drilled rotors, etc. so I need to order online. 
Matt O

Offline acenorm

  • Going in the Woods
  • *
  • Posts: 422
    • Norm Ehrke
    • View Profile
  • State: NJ/USA
  • TV: 2013 GMC Yukon XL
  • POP: 2014 Jayco X23F
Re: New Brakes and Rotors on TV
« Reply #3 on: March 01, 2017, 12:15:01 PM »
I've been in auto parts for over 20 years, if you want help looking it up, let me know, send me a PM with your VIN# and I can check the vendors I use at work to see if there are any variations. Oh and if buy from Rock auto, do a search for a 5% off code.
My 2 cents, but probably worth one.

Offline Lone Lock

  • Right At Home
  • *
  • Posts: 2493
    • View Profile
  • State: PA/USA
  • TV: 2008 Dodge Ram 1500 Quad Cab
  • POP: 2006 Skyline Nomad TT
  • TNT: EZ Up 10x10
Re: New Brakes and Rotors on TV
« Reply #4 on: March 09, 2017, 02:12:48 PM »
I finally got a chance to research the brakes to see if there are variations of the brakes depending on the Tundra Model or engine or anything.  It looks like the front brakes and rotors are the same for a 2007 regardless of the model, SR5, Limited, Tundra, or the engine size 4.0, 4.7, or 5.7.  I have the SR5 5.7.  The cab configuration does not even come up, 2wd or 4wd as a question.  The part number is even similar across the brands.  CARQUEST, Wagner, Raybestos, RockAuto is XXX 1303 for the brake pad. 

It looks like the kit I want from RockAuto is K295236 which is the front brake pads, rotors, clips and shims for $211. 
Matt O

Offline acenorm

  • Going in the Woods
  • *
  • Posts: 422
    • Norm Ehrke
    • View Profile
  • State: NJ/USA
  • TV: 2013 GMC Yukon XL
  • POP: 2014 Jayco X23F
Re: New Brakes and Rotors on TV
« Reply #5 on: March 09, 2017, 02:27:51 PM »
There's a mail in rebate too.
My 2 cents, but probably worth one.

Offline Lone Lock

  • Right At Home
  • *
  • Posts: 2493
    • View Profile
  • State: PA/USA
  • TV: 2008 Dodge Ram 1500 Quad Cab
  • POP: 2006 Skyline Nomad TT
  • TNT: EZ Up 10x10
Re: New Brakes and Rotors on TV
« Reply #6 on: March 17, 2017, 09:12:54 AM »
The brakes arrived this week!!!  Can I find time this weekend to do them????????  I have a lot going on.
Matt O

Offline Lone Lock

  • Right At Home
  • *
  • Posts: 2493
    • View Profile
  • State: PA/USA
  • TV: 2008 Dodge Ram 1500 Quad Cab
  • POP: 2006 Skyline Nomad TT
  • TNT: EZ Up 10x10
Re: New Brakes and Rotors on TV
« Reply #7 on: March 23, 2017, 09:39:28 AM »
I finally had a chance to work on the brakes last night.  The lugnuts were on so tight that I bent my 4way.  I broke them with the regular tire iron.  Then the wheel was frozen to the hub and had to whack it quite a few times to free it.  I look over the springs that hold the pads to the caliper and it doesn't look right.  One of them is broken and I'm studying it and scratching my head until I realize that the previous brake job put an extra spring in there and that spring broke and that is what looks odd.  OK, I go to take the caliper off and I don't have a 17mm socket, (16 and then 18 in my set wtf?) so I use a 17mm wrench because I know I don't want to round the bolt.  The wrench bent open  :tickedoff:

it was 8pm and I haven't even taken the other tire off.  Sooooo I throw in the towel and put the tire back on.  I need to decide my next steps.....buy a 17mm socket and do it on a Saturday when I have more time or just ask my mechanic to install my parts. 
Matt O

Offline Vagov

  • Going in the Woods
  • *
  • Posts: 264
    • View Profile
  • State: PA/USA
  • TV: 2004 jeep grand cherokee
  • POP: 2015 KZspree escape 196s
Re: New Brakes and Rotors on TV
« Reply #8 on: Today at 02:35:46 AM »
If. I was you, I try a box wrench for initial breaking the bolt free, not a ratching one ,or buy a  good 17mm 6 point socket, and use a long breaker bar, leverage is your friend here, also try soaking the bolts over night and rehitting them tomorrow with some pb blaster. Stuff works great,  wish you Good luck. 

 

Recent Topics

New Brakes and Rotors on TV
by Vagov
[Today at 02:35:46 AM]
Spring Opener Group Rally, Mar 24-26th, 2017
by 2HappyCampers
[Yesterday at 09:52:01 PM]
Spring Historical Gettysburg Rally - May 2017
by 2HappyCampers
[Yesterday at 09:47:48 PM]
Watkins Glen State Park - June 2018
by justchillin
[March 22, 2017, 09:21:11 PM]
Haunted Halloween Rally - Oct 06-08th, 2017
by justchillin
[March 22, 2017, 09:11:40 PM]
17' Coleman Ram-x Canoe
by 2HappyCampers
[March 22, 2017, 02:19:50 PM]
Camping with kids
by Lone Lock
[March 20, 2017, 09:07:35 AM]
Returning..
by Pathwacker
[March 17, 2017, 02:34:02 PM]
Venting batteries mounted inside the PUP
by Pathwacker
[March 14, 2017, 08:53:45 AM]
Crack in AC Shroud: self-inflicted :(
by thingette1
[March 13, 2017, 06:01:04 PM]
i need a key for 1980 coleman tent trailer
by Lone Lock
[March 13, 2017, 01:53:45 PM]
Promised Land State Park - Summer 2017
by thingette1
[March 07, 2017, 09:28:01 PM]
Worse SPUT Ever
by 2HappyCampers
[March 06, 2017, 10:23:23 PM]
Jackpot - Ice Maker
by 2HappyCampers
[March 06, 2017, 10:11:36 PM]
Where are ya? A Members Map
by phelps.rl@gmail.com
[March 06, 2017, 06:12:57 PM]