I had a gap between the front storage bin and side panel on the camper. The weather forecast looked great so I thought I'd start it today. It was very quick and easy so I'm thinking about another mod while thinks are taking apart. A dedicated circuit to the for the outside receptacle.
Here is the gap before starting with a small piece broken.
[smg id=280]
Here is the front storage bin taken apart and I replace some rotted wood.
[smg id=281]
Here is what the finished look with a side sheet of ridged aluminum and a bent piece at the top. I riveted the piece to the body panel and used adhesive caulked to the flexible ABS front panel.
[smg id=282]
The outside outside is on the same circuit as the main inside one so when we are cooking outside and the electric heater turns on, we trip the breaker. There are two lines running across the front of the camper so I'm going to test them and move the outside recept. I might put a second plug to the site power and run two cords, 30amp for the camper and 20a for the outside outlet.
769
49
1 Guest(s)
